Retro Gaming House Retro Pie Emulation Station Raspberry Pi Review
Affiliate links within this post may be commissionable.
This is not a sponsored post. I decided to purchase a Raspberry Pi with Retro Pi, Emulation Station, Kodi, and some other goodies pre-installed. I purchased mine from Retro Gaming House. https://www.retrogaminghouse.com/collections/retropie-emulators
The one I ordered came with 2 controllers that look a lot like PS4 controllers and a wireless keyboard. It had a small 32gb micro sd card with all the software pre-installed. They say they use their own skins and stuff too but I’m not sure if that claim is true or false.
It does have some surprisingly rare games. Lunar Walking School is on there, but not Lunar Eternal Blue or Silver Star Story. Lufia is on there, including an unfinished Sega Genesis version that I didn’t even know existed. Some of my old favorite cartridges and CDs are on there, like Final Fantasy, Tactics Ogre, Chrono Trigger, Earthbound, and Breath of Fire, just to name a few. And fun childhood memories of games I grew up with like Sonic, Ecco, Mario, and more.
Shipping was fast, arrived in less than a week. I began doing research on Retro Pie prior to receiving my console and I was already confused. I sent an email to their customer service team about how to install my own copies of roms onto their systems.
Initially, their customer service team responded within a day or two with a tutorial on 3 ways in which to get my own roms onto the console. When the console first arrived I was so excited that I didn’t try right away any of these methods as there was plenty to play already installed – and still is plenty to play too.
But after a week or two, I did want a nice way to play my retro games, which I do own, but it’d be nice to have them all on one HDMI ready tiny console. This thing is so tiny it fits in one hand. In fact you could probably fit at least 3 or 4 of them in one hand lol.
So I became more determined to load my own games. And here is where the misery begins.
So according to the guide the store sent me, as well as everything I’ve read online, I’m doing everything right.
There are 3 ways.
- USB – the most straightforward way. I formatted my USB to Fat32 and created a folder called retropie and stuck it into my machine. It says to wait until it stops blinking, but mine never did stop blinking. I let it run an entire day and when I checked on it again it still had not created any of the rom folders.
- I tried to manually create some folders on my USB using the path of retropie/roms/short name where short name is the console such as gba, snes, megadrive, etc. But this too did not work.
- Moving away from USB I decided to try SSH. I enabled it under the RetroPie configuration settings as it is off by default.
- Next I plugged my Raspberry Pi into my cable modem which is supposed to automatically connect it to my network. I chose to do a wired connection because none of the wireless methods of connecting were working.
- I had tried Wifi, and it says that the keyboard will not show your password on screen but rest assured it is working, but when I pressed enter nothing happened.
- So back to the wired connection. I ensured that SSH was enabled and then told it to show my IP address. I made note of the console’s IP address and went back to my computer
- On my computer I installed WinSCP to access my raspberry pi via SSH connection on my windows machine.
- I used the default username pi and password raspberry.
- The connection timed out.
- I changed port numbers. I had read about using 20, 80, or 55555.
- I tried all port numbers. Depending on the port numbers I got various errors, such as connection refused or connection timeout when trying to connect with WinSCP
- I tried looking briefly into Samba-Share but that seemed even more technical and over my head and I’d been trying for over 9 hours just to add a handful of roms.
- In the end I could not add roms.
- I emailed the company and now, almost 48 hours later am still waiting on a response.
- I don’t think I’ll be able to add my own roms and I am disappointed.
I don’t think I’ll be able to add my own roms and I am disappointed as it is missing quite a few that I would really like to play.
The whole process is way more technical than I’m comfortable with.
STILL…. In the end…. for $150 for the console, the 3,000ish games that came pre-loaded, and the controls and wireless keyboard (controls work fine, wireless keyboard i dunno lol maybe not working). But still I feel it’s a good value.
If I’m having THIS much trouble trying to just transfer in some roms, I can’t imagine I could have ever loaded retro pie and emulation station and everything else on my own. No way.
So $150 for 3,000 games, yeah I’ll take it still… Even though it has some issues…
Aside from not being able to load my own roms, there’s other issues as well, edges of the screen in menus (not within games, but pretty much anywhere else) are ever so slightly clipped off making it hard to read certain things sometimes – it’s rare, it only happens in a few screens, which I wouldn’t have seen unless trying all these settings and config options to get my own roms loaded.
The other big issue is the controls can be reconfigured to your preferred layout, but it is really sensitive and buggy. I just left mine on default settings, which maybe in Asia and/or Europe, is backwards from the USA. I keep wanting to press the bottom left button (X) to confirm, and the bottom right button (O) to cancel, because that’s how it is on almost every console in USA. but on this console it’s reversed. X cancels and O confirms…. SOMETIMES…. and other times… in certain games/menus it’s reversed AGAIN – back to the American way. That drives me a bit batty. But is a minor inconvenience.
It came with little to no documentation. And everything needed batteries which was another minor inconvenience. I looked up documentation online and after some fumbling around was up and running in under 20 minutes. But this transferring in my own roms thing still not working. I’ve reached out to the seller, and also am asking around in online communities trying to get it sorted out.
I would say…. yes it’s worth buying…
If you are technical enough, save yourself some money and mod your own raspberry pi unit.
But if you’re lazy and/or not technical, go ahead and buy this.
I have read mixed reviews about controls not working or the console not working, but mine works fine, except for MAYBE the keyboard, or maybe I just dunno wtf I’m doing – and then also I can’t connect to Wifi or SSH even with a hard wired connection – is it a problem of the system or am I doing it wrong? I can’t say for sure.
There are flaws as mentioned above, but I’m still playing with and enjoying my unit.
If I get my own roms installed I’d give this 5 out of 5 stars. Without my own roms, I give it like 3 stars, “good but not great”. Transferring my own roms is not the only issue, but it is the biggest issue for me in my opinion. There’s lots of other little issues but it’s a neat little machine with some fun games already loaded. Check it out and let me know what you think. Also if anyone has any advice for me on how to load my own roms and what I’m doing wrong please tell me lol.
- How I Decide Which Games To Play - May 21, 2022
- Why Nintendo Sports On Nintendo Switch Will Appeal To Casual Female Gamers - May 5, 2022
- Aksys Games Has Been Very Busy Announcing New English Otome Games - April 17, 2022